In‐line coupled single drop liquid–liquid–liquid microextraction with capillary electrophoresis for determining fluoroquinolones in water samples

A simple in‐line single drop liquid–liquid–liquid microextraction (SD‐LLLME) coupled with CE for the determination of two fluoroquinolones was developed. The method is capable to quantify trace amount of analytes in water samples and to improve the sensitivity of CE detection. For the SD‐LLLME, a thin layer of organic phase was used to separate a drop of 0.1 M NaOH hanging at the inlet of the capillary from the aqueous donor phase. By this way, the analytes were extracted to the acceptor phase through the organic layer based on their acidic/basic dissociation equilibrium. The drop was immersed into the organic phase during 10 min for extraction and then it is directly injected into the capillary for the analysis. Parameters such as type and volume of organic solvent phase, aqueous donor, and acceptor phases and extraction time and temperature were optimized. The enrichment factor was calculated, resulting 40‐fold for enrofloxacin (ENR) and sixfold for ciprofloxacin (CIP). The linear range were 20–400 μg/L for ENR and 60–400 μg/L for CIP. The detection limits were 10.1 μg/L and 55.3 μg/L for ENR and CIP, respectively, and a good reproducibility was obtained (4.4% for ENR and 5.6% for CIP). Two real water samples were analysed applying the new method and the obtained results presented satisfactory recovery percentages (90–100.3%).     

Thermogravimetric characterization of styrene–divinylbenzene copolymers containing alpha-isopropylaminophosphonic acid groups

A commercial styrene–divinylbenzene copolymer was functionalized by multistep reactions with alpha-isopropylaminophosphonic acid groups. Three different functionalized copolymers were obtained in which the phosphonic groups are in meta (1E), para (2E), and ortho (3E) positions. The thermal behavior was studied using the TG/IR hyphenated technique and kinetic analysis of thermo-oxidation under nonisothermal conditions. The evolved gas analysis confirms the partial thermo-oxidative degradation of polymeric materials, with significant preservation of the aromatic ring. The kinetic analysis was performed by three methods: Friedman, Flynn–Wall–Ozawa, and nonparametric kinetic.     

New Features in the Lipid A Structure of <Emphasis Type="Italic">Brucella suis</Emphasis> and <Emphasis Type="Italic">Brucella abortus</Emphasis> Lipopolysaccharide

Brucellaceae are Gram-negative bacteria that cause brucellosis, one of the most distributed worldwide zoonosis, transmitted to humans by contact with either infected animals or their products. The lipopolysaccharide exposed on the cell surface has been intensively studied and is considered a major virulence factor of Brucella. In the last years, structural studies allowed the determination of new structures in the core oligosaccharide and the O-antigen of this lipopolysaccharide. In this work, we have reinvestigated the lipid A structure isolated from B. suis and B. abortus lipopolysaccharides. A detailed study by MALDI-TOF mass spectrometry in the positive and negative ion modes of the lipid A moieties purified from both species was performed. Interestingly, a new feature was detected: the presence of a pyrophosphorylethanolamine residue substituting the backbone. LID-MS/MS analysis of some of the detected ions allowed assurance that the Lipid A structure composed by the diGlcN3N disaccharide, mainly hexa-acylated and penta-acylated, bearing one phosphate and one pyrophosphorylethanolamine residue.

Open image in new window

Graphical abstract ?

     

Thermal analysis of heat-treated silver fir wood and larval frass

Glasses having composition 5Li₂O–5ZnO– xBi₂O₃ –(90 ? x) P₂O₅ (x = 5, 10, 15, 20 and 25 mol%) were prepared by the normal melt quenching technique. Nanocomposite glass containing bismuth phosphate BiPO₄ nanocrystals was obtained, which can be attributed to homogeneous nucleation process. The formation of BiPO₄ nanocrystals was confirmed and characterized by X-ray diffraction patterns (XRD), transmission electron microscopy (TEM), differential scanning calorimetry, optical absorption (UV–Vis) and micro-hardness studies. The morphological analysis by XRD and TEM microscopy showed the formation of hexagonal BiPO₄ nanocrystals, and its estimated nanocrystalline sizes were found to be varying from 5.35 to 11.53 nm depending on the Bi₂O₃ concentrations. The density (ρ) and molar volume (V _m) were also determined and found to be in compositional dependence. Glass transition temperature (T _g) and glass crystallization temperature (T _c) were obtained and found to be increased (from 240.0 to 337.2 °C) with increasing Bi₂O₃ up to 20 mol% and then decreased (from 337.2 to 331.8 °C) due to the structural changes in the glass network. Effect of BiPO₄ content on the optical properties had been investigated. From the UV–Vis spectra, it was observed that the fundamental absorption edge shifts toward lower wavelengths, i.e., blueshifts with increasing Bi₂O₃ mol% up to 20 mol%, and then shifts toward higher wavelengths, i.e., redshifts beyond 20 mol%. It was also observed that the obtained E _opt (for indirect and direct transitions) increases with gradual increase in Bi₂O₃ content up to 20 mol% and then decreases beyond 20 mol%. This may be due to the introduction of Bi cations into the glass network as a network former up to 20 mol% causing a decrease in ΔE values, beyond 20 mol%, the introduction of Bi ions into the glass network interstitially leads to increase the values of ΔE. The optical properties of the present nanocrystallized glasses showed a quantum size dependence, in which the optical band gap energy (E _opt) was changed as a function of BiPO₄ nanocrystalline sizes.     

Quantitative asymptotic regularity results for the composition of two mappings

In this paper, we use techniques which originate from proof mining to give rates of asymptotic regularity and metastability for a sequence associated to the composition of two firmly nonexpansive mappings.     

Minimising movements for the motion of discrete screw dislocations along glide directions

In Alicandro et al. (J Mech Phys Solids 92:87–104, 2016) a simple discrete scheme for the motion of screw dislocations toward low energy configurations has been proposed. There, a formal limit of such a scheme, as the lattice spacing and the time step tend to zero, has been described. The limiting dynamics agrees with the maximal dissipation criterion introduced in Cermelli and Gurtin (Arch Ration Mech Anal 148, 1999) and predicts motion along the glide directions of the crystal. In this paper, we provide rigorous proofs of the results in [3], and in particular of the passage from the discrete to the continuous dynamics. The proofs are based on \(\Gamma \)-convergence techniques.     

Cauliflower-like CdS microspheres composed of nanocrystals and their physicochemical properties

Cauliflower-like cadmium sulfide (CdS) microspheres composed of nanocrystals have been successfully synthesized by a hydrothermal method using poly(ethylene glycol) (PEG) as the template coordination agent and characterized by a variety of methods. Our experiments confirmed that the size of the CdS microspheres could be easily modified by controlling the chain length of PEG. Powder X-ray diffraction and Raman spectroscopy measurements revealed the cubic structure of the CdS microspheres; morphological studies performed by HR-SEM and HR-TEM methods showed the cauliflower-like structure of the synthesized CdS microspheres. Each microsphere was identified to be created by the self-assembly of CdS nanocrystals and is attributed to the oriented aggregation of the CdS nanocrystals around a polymer-Cd(2+) complex spherical framework structure. X-ray photoelectron spectroscopy (XPS) and energy-dispersive X-ray (EDX) analysis confirmed the stoichiometries of the CdS microspheres. Diffuse reflectance spectrum (DRS) measurements showed that increasing the PEG chain length increased the band gap value of the CdS microspheres slightly, from 1.99 to 2.06 eV. The cauliflower-like CdS microspheres could be applied to photocatalytic degradation studies.     

Direct chlorine determination in crude oils by energy dispersive X-ray fluorescence spectrometry: An improved method based on a proper strategy for sample homogenization and calibration with inorganic standards

Official guidelines to perform chlorine determination in crude oil are (i) American Society for Testing and Materials (ASTM) D6470, which is based on the extraction of water from the oil and subsequent determination of the chloride by potentiometry, (ii) ASTM D3230, that measures the conductivity of a solution of crude oil in a mixture of organic solvents and (iii) US Environmental Protection Agency (EPA) 9075 that uses energy dispersive X-ray fluorescence spectrometry to quantify chlorine and it is applicable for the range from 200 μg g^− 1 to percent levels of the analyte. The goal of this work is to propose method to quantify lower amounts of chlorine in crude oil using energy dispersive X-ray fluorescence spectrometry using a simple calibration strategy. Sample homogenization procedure was carefully studied in order to enable accurate results. The calibration curve was made with standards prepared by diluting aqueous NaCl standard in glycerin. The method presented a linear response that covers the range from 8 to at least 100 μg g^− 1 of chlorine. Chlorine in crude oil samples from Campos Basin - Brazil were quantified by the proposed method and by potentiometry after extraction of chlorine from the oil. Results achieved using both methods were statistically the same at 95% confidence level.     

A peptidomic approach for monitoring and characterising peptide cyanotoxins produced in Italian lakes by matrix-assisted laser desorption/ionisation and quadrupole time-of-flight mass spectrometry

In recent years, the occurrence of cyanobacterial blooms in eutrophic freshwaters has been described all over the world, including most European countries. Blooms of cyanobacteria may produce mixtures of toxic secondary metabolites, called cyanotoxins. Among these, the most studied are microcystins, a group of cyclic heptapeptides, because of their potent hepatotoxicity and activity as tumour promoters. Other peptide cyanotoxins have been described whose structure and toxicity have not been thoroughly studied. Herein we present a peptidomic approach aimed to characterise and quantify the peptide cyanotoxins produced in two Italian lakes, Averno and Albano. The procedure was based on matrix-assisted laser desorption/ionisation time-of-flight mass spectrometry mass spectrometry (MALDI-TOF-MS) analysis for rapid detection and profiling of the peptide mixture complexity, combined with liquid chromatography/electrospray ionisation quadrupole time-of- flight tandem mass spectrometry (LC/ESI-Q-TOF-MS/MS) which provided unambiguous structural identification of the main compounds, as well as accurate quantitative analysis of microcystins. In the case of Lake Averno, a novel variant of microcystin-RR and two novel anabaenopeptin variants (Anabaenopeptins B(1) and Anabaenopeptin F(1)), presenting homoarginine in place of the commonly found arginine, were detected and characterised. In Lake Albano, the peculiar peptide patterns in different years were compared, as an example of the potentiality of the peptidomic approach for fast screening analysis, prior to fine structural analysis and determination of cyanotoxins, which included six novel aeruginosin variants. This approach allows for wide range monitoring of cyanobacteria blooms, and to collect data for evaluating possible health risks to consumers, through the panel of the compounds produced along different years.